High Temperature Inorganic Glue for Ceramic and Aluminosilicate

Basic Info

Model NO.	YN-049
CAS No.	No
Formula	No
EINECS	No
Bonding Function	High Temperature Resistant Adhesive
Morphology	Solid and Solvent
Application	Fiber & Garment, Ceramic
Material	Epoxy
Classification	Room Curing
Main Agent Composition	Inorganic Adhesive Material
Characteristic	Weatherability
Promoter Composition	Stabilizer
Composition	Inorganic Material
Color	Grey
Temperature	1400c, 1700, 900c
Usage	Ceramic Glue
Type	C-2, C-3, Cps
Transport Package	Plywood Case
Specification	CUSTOMIZED
Trademark	Yunnuo
Origin	China
HS Code	8547100000

Product Description

Property of condensate	C-2	C-3	CPS cupric oxide
Color	gray	gray	black
Heat resistant temperature C	1730	1460	980
Hardness	Hard,brittle	Hard,brittle	Hard,brittle
Electrical properties	Good insulation performance at high temperature	Good insulation performance at high temperature	Good insulation at room temperature
Medium resistance	Oil resistant, acid and alkali resistant, not resistant to boiling water	Oil resistant, acid and alkali resistant, not resistant to boiling water	Oil resistant, acid and alkali resistant, not resistant to boiling water
Coefficient of linear expansion	Similar to ceramic(80×10-6/C)	Similar to steel(12.9×10-6/C)	Close to steel, Slightly contracted
Socket strength / tensile strength (steel-steel)Mpa	82/37	79/34	96/-
Applied range	High-temperature instrumentation, electronics, temperature-measuring element coating and potting, high-temperature anti-oxidation coating of metal materials, ceramics and other high-temperature bonding	Bonding and potting of high temperature resistant metal parts, high temperature oxidation resistant coating of metal materials, high temperature resistant bonding of metal materials	Metal sleeve sticking, the bonding of tool measuring tools
Proportion of glue solid phase	1.6-2.5g	1.6-2.5g	3.5-5.5g
Proportion of glue liquid phase	1ml(about 1.39g)	1ml(about 1.39g)	1ml (about 1.7g)
Curing procedures	Room temperature 12-24 hours → 80C 2 hours → 150C 2 hours, cool slowly	Room temperature 12-24 hours → 80C 2 hours → 150C 2 hours, cool slowly	Slow heating,→ 80C 2 hours → 150C 2 hours, cool slowly
Net weight	500g	500g	750g

HT-CPS high temperature structural adhesivePhysical state: powder + liquidOperating time: 30minCuring conditions: 1. room temperature 12h; 2.80 C 2h; 3.150 C 2hColour: BlackDensity (g/cm3): 3.5Shear strength (MPa) GB / T7124-1999: 86 (socket)Impact strength (J / cm2) GB / T6328-1986: 8Tensile strength (MPa) GB / T6329-1996: 38.5Peel strength (N / cm) GB / T2791-1981: ---Working temperature (C): -196 ~ 980Heat-resistant temperature: 980 ºCWeight: 750g per groupMaterial: Inorganic copper oxide, temperature resistance 980 ºC.Uses: Used for bonding various hard alloy and ceramic turning tools, milling cutters, drills or gear cutters. The socket strengthis extremely high, which can be used to make extension rods and repair defects in high temperature casting conditions.Use operation1. Roughen the bonding surface and remove rust, oil and grease. The joint design is best with socket.2. Glue adjustment: The solid and liquid phases of various types of glue are adjusted according to the ratio of the technical index table, and it should be adjusted to a uniform and flowable paste. CPS copper oxide inorganic glue should not be excessively adjusted each time. It is best to adjust the glue on the containers (such as copper) that dissipate quickly.3. Curing with glueApply (fill) the glue to the surface to be bonded (sealed), and apply a little contact pressure to cure it after assembly. If thestrength is not high and medium resistance is not required, it can be cured at room temperature. Otherwise, please follow the curing procedure of the technical specification table.

Product name: HT C-2 ultra high temperature repair agentPhysical state: solid+liquidOperating time: 30minCuring conditions: 1.) Room temperature 12h; 2.) 80C -150C 2h; 3.) Slow coolingColor: off-whiteDensity (g /cm3): 1.4Compressive strength (MPa) GB / T1041-1992: 82 (socket strength)Shear strength (MPa) GB / T7124-1999: 37 (tensile strength)Bending strength (MPa) GB / T1024-1992:-Insulation strength (kv / mm) GB / T2411-1980: 30Working temperature (C): -60 ~ 1730Net weight: 500g two-componentUses: Inorganic ceramic material, temperature resistance 1730 C. It can repair equipment working under high temperatureconditions, such as repairing damaged or broken acid resistant tanks, blast furnace lining, steel ingot molds and other equipment,burner ignition devices, potting of molten steel temperature probes, etc.